6 Layer PCB

Two internal layers, and two exterior layers, including two internal planes—one for the ground and the other for the power—make up a conventional six-layer PCB stack-up. With this architecture, EMI is improved, and low- and high-speed signals can be routed more effectively.


  • For denser boards with such a small footprint: You can make do with four signal planes, one ground plane, and one power plane when routing a heavier board with small footprint.
  • For more compact boards that combine wireless and analog signals: You can choose a stack-up that looks like this on this type of board: signal layer/ground/power plane. The external and internal signal layers in this kind of stack-up are divided by two enclosed ground planes. The internal signal layers and EMI are kept apart by the stack-up design.
  • For printed circuits containing sensitive traces: It is best to choose a stack-up that will seem like this: signal layer/2 signal layers/ if you want to make printed circuit boards with such a lot of sensitive traces. Sensitive traces will be well-protected by the stack. The stack is appropriate for circuits that use fast analog or digital signals with high frequency. The low-speed communications on the outer layer will be protected from these signals.

For boards of this kind, the stack-up of the form ground/signal layer will be ideal for deployment close to a powerful radiation source. This stack-up effectively reduces EMI. Additionally, this stack-up works well for circuit boards that will be used in loud settings.


  • Such printed circuit boards have a smaller footprint than some other circuit boards because of their multi-layered architecture. This is especially advantageous for small devices.
  • As was previously said, a six-layer PCB stack-up design necessitates extensive preparation. By minimizing mistakes in its detailing, high-quality construction is ensured. All major PCB manufacturers today also use a variety of testing and inspection methods to guarantee the suitability of these circuit boards.
  • Lightweight Construction: Lightweight components are being used to create compact PCBs, which helps to lower the overall weight of a PCB. Contrary to single or even double PCBs, 6-layer circuit boards only need one connector to connect components together.


    Get In Touch

    Contact Info

    Phone number

    (456) 789 10 12

    (456) 789 10 15

    Email address

    Address info

    1363-1385 Sunset Blvd Los Angeles